Mobile Printer
Blog
Home Mobile Printer

Mobile Printer

  • Product Introduction of RP850 Bluetooth Thermal Receipt Printer with Auto Cutter
    • Dec 15,2019

    Product Introduction of RP850 Bluetooth Thermal Receipt Printer with Auto Cutter 850 series printer is a POS direct thermal receipt printer with easy operation and high cost effective, which is widely used in supermarket, hospital, restaurant, bank, oil station, turnpike etc. Safety Notice: Please read carefully and strict compliance with use of following instructions before operating the printer....

  • The Driver Instruction of WIFI Printer Thermal RP820
    • Dec 15,2019

    The Driver Instruction of WIFI Printer Thermal RP820 Two types of drive for 820 Series: one is installed directly under Windows9x/ME/ 2000 /XP/WIN7/WIN8, the other is to drive through Ethernet. (1) Install driver under Windows Add printer in the Windows, and appoint the driver documents in the driver disk to Windows. It can print once you start print command in the program. In this way, Windows’ p...

  • Fix the Paper Jam​ and Fault treatment Intruction​ of Thermal Receipt Printer Bluetooth RP820
    • Dec 15,2019

    Fix the Paper Jam and Fault treatment Intruction of Thermal Receipt Printer Bluetooth RP820 I. Fix the Paper Jam of Thermal Receipt Printer Bluetooth RP820 When paper jam happens, turn off the power supply and open the top cover, wait for the cooling of print head then remove the jammed paper. After that, reload the paper roll and close the top cover. Use the recommendator...

  • Print Roll Maintenance of Bluetooth Android Thermal Printer RP820
    • Dec 15,2019

    Print Roll Maintenance of Bluetooth Android Thermal Printer RP820 When the printer has following circumstance, the user should clean the print roll: (1) Printing is not clear; (2) Some longitudinal columns on the printing page is vague; (3) Loud noise when feeding. Procedure of maintaining the print roll is listed below: (1) Turn off the power supply and open the top cover. (2) Use the cotton clot...

  • Printer Maintenance of WIFI Bluetooth Thermal Receipt Printer RP820
    • Nov 22,2019

    Printer Maintenance of WIFI Bluetooth Thermal Receipt Printer RP820 1. Print Head Maintenance When the printer has following circumstances, the user should clean the print head: (1) Printing is not clear; (2) Some longitudinal columns on the printing page is vague; (3) Loud noise when feeding. Procedure of maintaining the print head is listed below: (1) Turn off the power supply and open the top c...

  • Self-checking of RP820 WIFI Bluetooth Thermal Receipt Printer
    • Nov 22,2019

    1. Setting Printer Mode of RP820 WIFI Bluetooth Thermal Receipt Printer 820 printer is initially setup with default value. However, the default printer mode can be reconfigured to satisfy customer’s needs through the DIP switch, which is located at the bottom of the printer. The function of DIP switch setting as follows: 2. Self-checking of RP820 WIFI Bluetooth Thermal Receipt Print...

  • Power Switch, Keystroke and Indicator Light of RP820 Thermal Receipt Pos Printer
    • Nov 22,2019

    Power Switch, Keystroke and Indicator Light of RP820 Thermal Receipt Pos Printer 1. Power Switch Switch is for turning on/off the power supply of printer which is located on the left. When pressing “-”, the printer turns on and when pressing “O”, it turns off. Notice: Do not turn on the switch unless the user connects the power supply. 2. Keystroke and Indicator Light Keystroke and ...

  • Installation and Operation of RP820 Bluetooth Thermal Pos Receipt Printer
    • Nov 14,2019

    Installation and Operation of RP820 Bluetooth Thermal Pos Receipt Printer 1. Contents in the package Please check the parts when opening the box, if there is something missed, please contact with the supplier or the manufacturer.  2. Printer Connection (1) To ensure the printer and PC is powered off and then insert the matched data connection lines to the interfaces (USB/Parallel/Serial) of t...

  • The Specification of RP820 Bluetooth Thermal Receipt Printer
    • Nov 14,2019

    The Specification of RP820 Bluetooth Thermal Receipt Printer ● Printing Method:Direct thermal printing ● Paper Width:79.5±0.5mm ● Effective Printing Width:72mm ● Printing Speed:300mm/s ● Print head performance Resolution:504 dots/line or 576 dots/line TPH: 100KM ● Interface: Cash Drawer Control:6 lines RJ-11 socket,output: DC24V/1A ● Character ASCII code character set:12×24 dots,1.25(W)×3.00(H)mm ...

Sign Up For Newsletter

Wants To Get Latest Updates! Sign Up For Free.

Copyright © 2024 Rongta Technology (Xiamen) Group Co.,Ltd..All Rights Reserved. 闽ICP备14000025号-1

#

Leave a message

Leave a message

    We will contact you as soon as possible!