Blog
Blog
Home Blog

Blog

  • Command Type and Paper Saving Setting of 3inch Thermal Pos Printer
    • Apr 02,2022

    1. Command Type Setting of 3inch Thermal Pos Printer There are two types of commands: label command and ESC/POS command. 2. Paper saving As shown in the figure below, the paper saving settings are on the left, and the right side is divided into normal paper and paper saving previews. After setting, click "Set" 3. Other Settings You can set the serial number, etc. in "Others". In USB setting i...

  • Serial Port Setting and Search Function of 80mm POS Receipt Printer
    • Apr 02,2022

    1. Serial Port Setting of 80mm POS Receipt Printer You can change the serial port parameters of the printer according to your needs, such as data bits, handshake signal protocol, etc. Note: After setting the serial port, the printer's serial port parameters have changed. You need to return to the main screen and reconfigure the serial port (the configuration parameters must be consistent with the ...

  • Baud Rate and Print Density Setting of Thermal Mobile Printer
    • Apr 02,2022

    1. Baud rate, print density, etc. of thermal mobile printer This page is mainly for mobile printers, such as 200 series. Customers can modify the baud rate, character set to be used, print density, supported fonts, etc. according to their needs. 2. Printer mechanism heating time Enter the required heating time, and then select "Settings". After setting, print a self-test page to check whether the ...

  • Black Mark Setting Instruction of 3inch Receipt Printer Thermal
    • Mar 30,2022

    Black Mark Setting Instruction of 3inch Receipt Printer Thermal 1. "Enable Black Mark" is used to enable the black mark function. The printer will beep once if it is enabled successfully; 2. After enabling black mark, turn off the printer and then turn it on again. You must restart the printer before setting the black mark parameters. 3. Enter the length of the black-marked paper, that is, the len...

  • 80mm Thermal Bluetooth Printer Parameter Setting Instruction
    • Mar 28,2022

    80mm Thermal Bluetooth Printer Parameter Setting Instruction If the printer has Bluetooth function, you can set the Bluetooth parameters. (1)First press and hold the FEED button of the printer, and then turn on the printer to print the self-test page. From the self-test page, find out the Bluetooth pairing name and password of the printer. (2)The Bluetooth pairing name and password can be changed ...

  • Thermal WIFI Printer Parameter Setting Instruction
    • Mar 09,2022

    WIFI Printer Parameter Setting Instruction If your 2inch thermal receipt printer supports WiFi connection, you need to set the WiFi parameters. 1. Wireless router setting instruction (1) Set the SSID, namely the router name, in the WiFi settings of the router. (2) Wireless network security settings a. Do not enable wireless security" can be selected; b. If encryption is required, WPA-PSK/WPA2...

  • Ethernet Setting of 80mm Receipt Pinter Thermal
    • Mar 07,2022

    Ethernet Setting of 80mm Receipt Pinter Thermal Double click tool“PrinterTool.exe” and the following screen will appear; After the printer is connected (Click 80mm Thermal Receipt Printer Setting Integration Tool Manual to see how to connect printer by PrinterTool), Select "Set Printer" in the main screen. 1. Set the IP address of the printer, change it to "...

  • How to Make Basic Settings of 80mm Receipt Printer Through the Printer Tool?
    • Feb 28,2022

    How to Make Basic Settings of 80mm Receipt Printer Through the Printer Tool? 1."Set Printer" function in the main screen Double click tool“PrinterTool.exe” and the following screen will appear; After the printer is connected (Click 80mm Thermal Receipt Printer Setting Integration Tool Manual to see how to connect to the printer by PrinterTool), Select "Set Printe...

  • How to Update the Program of 80mm Receipt Thermal Printer
    • Feb 25,2022

    How to Update the Program of 80mm Receipt Thermal Printer 1."Download" function in the main screen Double click tool "PrinterTool.exe" and the following screen will appear; After the printer is connected (Click 80mm Thermal Receipt Printer Setting Integration Tool Manual to see how to connect to the printer through PrinterTool), click "Download" an...

Sign Up For Newsletter

Wants To Get Latest Updates! Sign Up For Free.

Copyright © 2022 Rongta Technology (Xiamen) Group Co.,Ltd..All Rights Reserved. 闽ICP备14000025号-1

#

Leave a message

Leave a message

    We will contact you as soon as possible!