58/76/80mm Receipt Printer
Blog
Home 58/76/80mm Receipt Printer

58/76/80mm Receipt Printer

  • Fault treatment of 80mm Thermal Printer
    • Aug 21,2019

    一、Fix the Paper Jam When paper jam happens, turn off the power supply and open the top cover, wait for the cooling of print head then remove the jammed paper. After that, reload the paper roll and close the top cover. Use the recommendatory paper or the one which has the same quality with specified width would reduce the risk of paper jam. 二、Fault treatment of 80mm Thermal Printer When the printer...

  • Maintenance​ and Interface Introduction of 80mm Thermal Receipt Printer
    • Aug 21,2019

    Maintenance and Interface Introduction of 80mm Thermal Receipt Printer 一、Cash Drawer Interface Cash drawer interface adopt RJ-11 standard, 6 lines socket and it outputs DC 24V/1A. Insert the RJ-11 socket to the corresponding interface which could through the printer to open the cash drawer. Pin function of cash drawer interface is listed as below: 二、Printer Maintenance 1、Print Head Maintenance Whe...

  • Power Switch, Keystroke and Indicator Light of 80mm Series Receipt Printer
    • Aug 14,2019

    Power Switch, Keystroke and Indicator Light of 80mm Series Receipt Printer 1、Power Switch     Switch is for turning on/off the power supply of printer which is located on the left. When pressing “-”, the printer turns on and when pressing “O”, it turns off.     Notice:Do not turn on the switch unless the user connects the power supply. 2、Keystroke and Indicator L...

  • Installation and Operation of RP80 Series Thermal Receipt Printer
    • Aug 14,2019

    Installation and Operation of RP80 Series Thermal Receipt Printer 1、Contents in the package Please check the parts when opening the box, if there is something missed, please contact with the supplier or the manufacturer. 2、Printer Connection (1) To ensure the printer and PC is powered off and then insert the matched data connection lines to the interfaces (USB/Parallel/Serial) of the printer, the ...

  • The Main Features and Technical Specification of RP80 series Thermal Printer
    • Aug 14,2019

    The Main Features and Technical Specification of RP80 series Thermal Printer 1、Main Features of RP80 series thermal printer ● High print quality ● Low noise ● Supports cash drawer driver ● Exquisite and lightweight,Pretty outside design ● Reasonable structure, easy using ● the font could be magnified, bolded or underlined, and also the character line spacing and left and right spacing can be ...

  • Troubleshooting of 76mm impact receipt printer
    • Aug 06,2019

    Troubleshooting of 76mm impact receipt printer Printer failure, you can refer to below instruction. If still can not troubleshoot, please contact the dealer or manufacturer. 1、Indicator on the control board not light Check whether the power cord is properly inserted into the printer, power adapter and power socket. Check whether the printer's power switch is turned on. 2、Indicator indicates normal...

  • Black Mark Position Control Instruction of 76mm Thermal Printer​
    • Aug 06,2019

    Black Mark Position Control Instruction of 76mm Thermal Printer 1、Printing mechanism and printing control relevant parameters (1) From the print head of printing mechanism to the printer  head tear paper line position is 22 mm. (2) From the print head of printing mechanism to the  black mark detection switch is 28 mm. 2、Black mark printing note (1) Black Label must be printed on the...

  • The interface Introduction of 76mm thermal receipt printer
    • Aug 06,2019

    The interface Introduction of 76mm thermal receipt printer I. Printer Serial Port 76 printer's serial port is RS-232 standard, and communication baud  rate can be 4800bps, 9600bps, 19200bps or 38400bps optional (can  be adjusted via DIP switches). It is 8 bits of data, no parity, 1 stop  bit, support RTS / CTS and XON / XOFF handshake protocol. The printer serial port pin funct...

  • Installation And Operation of 76mm Impact Printer
    • Jul 30,2019

    1、76mm Impact Printer connection method The printer and the PC should be closed and communication cable  is inserted in the printer connection port. The other side of communication cable (serial cable is 9-pin connector and parallel cable is 25 -pin connector) is inserted in the host PC's serial / parallel / USB /Ethernet. (2) If cash drawer can be open electrically, put the RJ-11 connector i...

  • Technical Specifications of 76mm Impact Receipt Printer
    • Jul 30,2019

    1、Main features of 76mm impact receipt printer ● Low noise, bidirectional and high speed printing ● Support cash drawer driver, support double color printing (black and red) ● Compact and attractive appearance ● Reasonable structure, easy operation and maintenance ● Interface optional : USB, parallel, serial,Ethernet ● Paper source sensor, automatic paper loading, and  automatic detection of ...

    • 1

      2
    A total of

    2

    pages
Sign Up For Newsletter

Wants To Get Latest Updates! Sign Up For Free.

Copyright © 2019 XIAMEN RONGTA TECHNOLOGY CO.,LTD.All Rights Reserved. Powered by dyyseo.com

#

Leave a message

Leave a message

    We will contact you as soon as possible!